Follow

Manually Installing the Windows Enterprise Agent

Created by: Brendan Bone
Created date:
Last Updated date:

Introduction: This document outlines the procedure of installing the Enterprise Agent on Windows, and lists all the parameters that can be used during installation.

 

Prerequisites:

Procedure:

  1. Copy the proper Agent installer MSI (typically in the \bin\Agent folder within the Enterprise installation directory) to the local machine
  2. Copy the public certificate to the local machine
  3. Open a Command Prompt (as Administrator)
  4. Formulate and run the installation command, according to the following:

msiexec /i "[full_path_to_agent]" CER="[full_path_to_certificate]" {additional parameters} allusers=2

Parameter Value Default Value Required Description
CER= <path> N/A Yes Full path to the public certificate. Path must be enclosed in quotes if it contains spaces.  Acceptable certificate formats are P7B, P7C, DER, CER, and CRT.
INSTALLDIR= <path> C:\Program Files\AccessData\Agent No Specifies a desired path to install the agent.  Path must be enclosed in quotes if it contains spaces.    If not specified, the default value is assumed.
PORT= <port> 3999 No The port that the agent will be listening on.  If not specified, the default value is assumed.
STORESIZE= <number> 268435456 No Specifies the agent temporary data storage size.  If not specified, the default value is assumed.
SYSTEMSIZE= <number> 16777216 No Specifies the agent configuration files storage size.  If not specified, the default value is assumed.
TRANSIENT= 0 | 1 0 No A 1 Indicates that the agent will be transient/temporary, and requires use of the LIFETIME parameter.  A 0 indicates that the agent will be permanent.  If not specified, the default value is assumed.
LIFETIME= <number> 0 No Specifies the amount of time that a transient agent will exist before self-destructing.  A negative value is used to denote minutes (eg. -30 denotes 30 minutes), and a positive value is used to denote days (eg. 30 denotes 30 days).  Requires use of  TRANSIENT=1.
FOLDER_STORAGE= 0 | 1 0 No A 1 Indicates that the agent will not use protected storage.  A 0 indicates that the agent will use protected storage.  If not specified, the default value is assumed.
SERVICELESS= 0 | 1 0 No A 1 Indicates that the agent will not run as a service.  A 0 indicates that the agent will run as a service.  If not specified, the default value is assumed.
MAMA= <hostname:Port> or <IP:Port> N/A No

Hostname or IP address and port of the Site Server that the agent should check-in with.  Default Site Server port is 54545.  If using v6.x or newer heartbeat port is by default 54555. This should only be used with a product that uses Site Server.

Retry Interval:
Connect every 30 mins.

Retry 3 times.

Wait 30 Seconds between retries
PUBSS= <IP:Port> N/A No IP address and port of the Public Site Server that the agent should check-in with.  Default Site Server port is 54545.  This should only be used with a product that uses Site Server.
PUBSS_DELAY= <number> N/A No The delay cycle, in seconds, between connections to the Public SiteServer.  This will reset to the value sent from the SiteServer upon successful connection.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk